Bluboo S8 spare parts

Technical Characteristics of Bluboo S8 Repuestos

The Bluboo S8 smartphone components and their technical characteristics are as follows:

• Display: 5.7 inch HD+ display with 1440 x 720-pixel resolution
• Processor: MediaTek MT6750T Octa Core 1.5GHz
• RAM: 3GB
• Storage: 32GB expandable via SD card up to 256GB
• Camera:Dual rear cameras 16MP + 3MP and 8MP front camera
• Battery:3450mAh Lithium-ion battery
• Operating System: Android 7.0 Nougat
• Connectivity: Supports 4G, WiFi, GPS, Bluetooth, etc

Instructions for Replacing Bluboo S8 Repuestos

Precautions

Remember to power off the phone before starting the repair process and remove the SIM card and the SD card.

Tools Needed

• Screwdriver
• Plastic pry tool
• Tweezers
• Spudger
• New Bluboo S8 parts you are replacing

Steps for Replacing the Parts

Follow these steps carefully to replace the Bluboo S8 parts:

• Step 1: Begin by removing the back cover of the phone using the plastic pry tool.
• Step 2: Unscrew all visible screws using the screwdriver.
• Step 3: Use the plastic pry tool again to detach the plastic bracket covering the internals of the phone.
• Step 4: Detach the battery connector using the plastic pry tool or the spudger.
• Step 5: Disconnect all the connectors attached to the motherboard and remove it gently.
• Step 6: Identify the part to be replaced, be it the camera, RAM, or any other component.
• Step 7: Carefully remove the faulty part and replace it with the new one.
• Step 8: Once the new part is in place, reassemble all the components by reversing the dismantling process.

This guide aims to handle the most common replacements. For any other part replacements not covered, seek professional help.