Bluboo XFire 2 spare parts

Technical Characteristics of Bluboo XFire 2 Repuestos

The Bluboo XFire 2 is a smartphone, known for its reliability and performance. Here are the key specifications:

• Dimensions: 140.2 x 70.3 x 7.9 mm (5.52 x 2.77 x 0.31 in)
• Display: 5-inch IPS LCD capacitive touchscreen
• Resolution: 720 x 1280 pixels
• OS: Android 5.1 (Lollipop)
• Processor: Quad-core 1.3 GHz Cortex-A7
• Memory: 1GB of RAM with 8GB internal storage
• Battery: Li-Ion 2150 mAh, non-removable
• Camera: 5MP rear camera and 2MP front camera

Instructions for Replacing Bluboo XFire 2 Repuestos

To replace the Bluboo XFire 2 parts, follow these steps carefully:

Preparation

• Ensure you have the necessary tools: mini screwdriver, plastic prying tool, tweezers, and a new replacement part.
• Switch off the phone and disconnect it from any power source.

Step 1: Remove the Back Cover

Use the plastic prying tool to gently detach the back cover from the phone.

Step 2: Remove the Battery

Using the same tool, lift the battery from its housing.

Step 3: Unscrew the Screws

With the mini screwdriver, detach the screws holding the underlying cover. Take note of where each screw goes for reassembly.

Step 4: Replace the Damaged Part

Depending on the part to be replaced (camera, speaker etc.), remove the faulty component using the tweezers and replace with the new component.

Step 5: Reassemble the Phone

Follow the disassembly steps in reverse order, carefully screwing in all the screws in their respective spots and placing the battery and back cover back in place.

After following the steps to replace the Bluboo XFire 2 replacements, turn on your smartphone. If the newly replaced part doesn't work, retrace the replacement steps to ensure everything was done correctly. If it still doesn't work, consult a professional for assistance.