Plug in connector BQ

Technical Characteristics of Conector de Carga BQ

The Conector de Carga BQ, also known as the BQ Charging Connector, is a central part of various BQ smartphone models. It's responsible for the charging transmission from the charging cord to the phone's battery.

• Type: Micro USB / USB Type C (depends on the phone model)
• Compatibility: Specific to BQ smartphone models
• Function: Power supply transmission
• Material: Metal and High-Quality Plastic

Instructions to Replace Conector de Carga BQ

Step 1: Gather Necessary Tools

To replace the Conector de Carga BQ, you will need the following tools:

• Small Philips Screwdriver
• Plastic Opening Tools
• Eject Pin
• New Conector de Carga BQ

Step 2: Turn off the phone

For safety reasons, it's recommended to completely turn off the BQ smartphone before proceeding with the replacement.

Step 3: Remove the SIM tray

Use an eject pin to remove the SIM card tray from the phone.

Step 4: Open the Back Cover

Using a plastic opening tool, carefully pry open the back cover of your BQ smartphone starting from the bottom to the top.

Step 5: Remove the screws

Once the back cover is off, you will see several small screws. Use your Philips screwdriver to remove these.

Step 6: Remove the battery

With the screws removed, the battery is now accessible. Gently lift the battery and disconnect it.

Step 7: Replace the Conector de Carga BQ

The Conector de Carga BQ is usually located at the bottom of the phone. Carefully disconnect the old charging port and replace it with the new one.

Step 8: Reassemble the Phone

Now, simply reverse the steps: reposition the battery, replace the screws, snap the back cover on, and slide the SIM card tray back in. There you have it — your new Conector de Carga BQ is ready to go!