Caterpillar Cat S42 spare parts

Caterpillar Cat S42 Technical Characteristics

The Caterpillar Cat S42 is a robust, rugged phone that boasts numerous features, primarily targeted towards those who work in tough environments or enjoy outlandish adventures. Its features include:

• Processor: MediaTek Helio A20 MT Quad-core 1.8 GHz
• Storage: 32GB, expandable via MicroSD up to 128GB
• Memory: 3GB RAM
• Screen: 5.5" HD+ (1440x720) Corning Gorilla Glass 5
• Camera: 13MP Rear & 5MP Front-facing
• Battery: 4200mAh non-removable
• Operating System: Android 10 (upgradeable to 11)
• Durability: Waterproof, Dustproof, Drop-proof up to 1.8m

Replacing Caterpillar Cat S42 Parts

Tools Needed

• Screwdriver
• Plastic pry tool
• Tweezers

Instructions

Note: Given the complexity of the device, any replacement attempt may void your warranty. Proceed at your own risk.

• Turn off the device and remove the SIM card tray.
• Unscrew the back cover using the proper screwdriver. There should be four screws at each corner of the phone.
• Use the plastic pry tool to gently separate the back cover from the phone.
• Locate the part you wish to replace. Let's say, for example, you want to replace the battery. It should be visible as soon as you open the back cover.
• Disconnect the battery connector using the tweezers.
• Carefully pry the battery from the adhesive holding it in place. Be gentle as you may risk puncturing the battery.
• Place your replacement battery in the exact position where the previous one was located.
• Connect the battery connector and follow the steps backwards to reassemble the phone.

Make sure the device powers on after you've replaced the component(s). If it doesn’t, double-check the connections and make sure everything is firmly in place.