Coolpad Play 6 spare parts

Technical Specifications of Coolpad Play 6 Repuestos

The Coolpad Play 6 is an advanced smartphone with high-quality repuestos, or replacement parts, that maintain its optimal performance. Here are the foremost technical specifications:

• Display: 5.5 inches full HD, IPS LCD capacitive touchscreen, 16M colors
• Resolution: 1080 x 1920 pixels
• Processor: Qualcomm Snapdragon 653
• Memory: 6GB RAM, 64GB internal storage
• Battery: 4060mAh
• OS: Android 7.1.1 (Upgradeable)
• Camera: Rear - dual 13MP, Front - 8MP

Instructions to Replace Coolpad Play 6 Repuestos

Below are the steps to replace the key components of the Coolpad Play 6, ensuring safety and efficiency.

Preparation

• Ensure the phone is powered off.
• Prepare the necessary tools: small screwdrivers, plastic opening tools, tweezers, etc.

Back Cover Removal

• Start by loosening the screws at the bottom of the phone.
• Use the plastic opening tool to gently lever up the back cover around the sides.

Battery Removal

• Remove the screws securing the battery connector board.
• Use tweezers to unplug the battery connector by lifting it upwards.
• Remove the battery gently from the phone base.

Replacing the Components

• After removing the battery, you can access the inner components: motherboard, camera, etc.
• Disconnect the desired component connector from the motherboard.
• Remove the component and replace it with the new one.
• Reconnect the connector to the motherboard.

Reassembly

• Reinstall the battery and plug its connector back in.
• Place the back cover on, making sure it fits in properly.
• Tighten the screws back in.

Note: This guide is simplified and may not contain complete or correct information for all situations. Always follow all safety measures and guidelines provided by the device manufacturer.