Crosscall Trekker M1 spare parts

Crosscall Trekker M1 Repuestos: Technical Specifications

The Crosscall Trekker M1 is a rugged smartphone that is built to withstand extreme environments and conditions. The following are some of its technical features:

• Display: 4.5-inch IPS capacitive touchscreen with Corning Gorilla Glass 3 for protection.
• Processor: Qualcomm Snapdragon, Quad-core 1.1 GHz.
• Storage: 8GB internal storage, expandable up to 32GB through microSD.
• RAM: 1GB.
• Camera: Rear - 8 MP, Front – 2 MP. Both with LED flash.
• Battery: 3000mAh, Li-Ion.
• Operating System: Android 5.1.1 (Lollipop).
• Connectivity: Wi-Fi, GPS, Bluetooth, 3G, and 4G.

Instructions for Replacing Crosscall Trekker M1 Repuestos

Before you begin, ensure you have a replacement part, a small Phillips screwdriver, and a plastic opening tool.

Step 1: Power Off the Device

Press and hold the power button on the right side of the device. Tap "Power off" from the menu that appears, then tap "OK".

Step 2: Remove the Back Cover

Unscrew the four screws holding the back cover in place. Then use the plastic opening tool to carefully pry open the back cover.

Step 3: Remove the Battery

Lift the battery up from its compartment.

Step 4: Replace the Faulty Component

Depending on which component is faulty, the steps may vary. Generally, components are held in place by screws or connected via cables or connectors. Unscrew or unplug the faulty component and replace it with the new one.

Step 5: Replace the Battery and Back Cover

Place the battery back into its compartment and replace the back cover. Make sure it fits snugly, then screw the back cover in.

Step 6: Power the Device Back On

Press and hold the power button until the device powers on to ensure the replacement was successful.

Note: Always take care when repairing electronic devices. If in any doubt, consult with a professional.