Cubot Cheetah 2 spare parts

Cubot Cheetah 2 Repuestos Technical Characteristics

The Cubot Cheetah 2 is a powerful smartphone from the Cubot brand, featuring exceptional specifications. Here we'll highlight its components and their technical characteristics.

• Screen: The device comes with a 5.5-inch touch-sensitive IPS LCD screen which has a resolution of 1920 x 1080 pixels.
• Battery: Cubot Cheetah 2 has a non-removable Lithium-ion 3000mAh battery which provides the smartphone with enough power for everyday usage.
• Camera: The device is equipped with a 13.0 MP back camera and an 8.0 MP front camera.
• Processor: The device comes with an Octa Core 1.5 GHz processor.
• RAM and Storage: The device has 3 GB of RAM and 32 GB of internal storage, extendable up to 128 GB with a memory card.

Replacing Cubot Cheetah 2 Repuestos

Replacement of components in the Cubot Cheetah 2 should be done with extreme care. Below are instructions on how to replace some of the main components of the device. Please note, this should ideally be done by a trained professional.

Screen Replacement

• Power off the Cubot Cheetah 2 before starting the replacement process.
• Remove the SIM card and micro SD slot.
• Use a heat gun to soften the adhesive securing the display to the rest of the phone.
• Use a suction cup and opening picks to lift the screen from the lower edge.
• Unclip the display connector from the motherboard.
• Replace the broken screen with a new one and reassemble the phone reversing these steps.

Battery Replacement

• Power off the device and remove the SIM card slot.
• Heat the screen of the phone to loosen the adhesive bonds.
• After removing the screen, locate the battery connector and disconnect it.
• Remove the old battery and replace it with the new one.
• Reconnect the battery connector and reassemble the phone by following the steps in reverse order.