Cubot Cheetah spare parts

Cubot Cheetah Repuestos Technical Specifications

The Cubot Cheetah smartphone is a powerful device packed with advanced features. When it comes to repairs or replacements, it's crucial to know its components. Here we will provide a brief overview of the main technical aspects of the hardware parts (repuestos) of the Cubot Cheetah.

Screen

The device comes with a 5.5-inch screen with HD resolution. It's an IPS capacitive touch screen which ensures rich color and wide viewing angles.

Processor

It uses a MediaTek MT6753 Octa-Core processor which provides extreme performance efficiency whilst reducing power consumption.

Camera

The smartphone comprises of a main 13MP camera and a 5MP front camera. They are capable of recording videos up to HD resolution.

Battery

Cubot Cheetah carries a non-removable Lithium-Ion battery of 3050 mAh, providing a long-lasting usage.

Memory

The device comes with a 3 GB RAM and an internal storage of 32 GB which can be expanded up to 128 GB.

Replacing Cubot Cheetah Components

Tools Needed

• Screwdriver
• Spudger
• Tweezers

Steps for Replacing Cubot Cheetah Components

Step 1: Turn off the Device

Ensure that the device is turned off to avoid any damage during the repair process.

Step 2: Remove the Back Cover

Use the spudger to gently pry off the back cover from the device. Be careful not to damage any internal components.

Step 3: Disconnect the Battery

Locate the battery connector and use your tweezers to gently disconnect the connector.

Step 4: Remove the Required Component

Using your screwdriver, undo the screws holding the component in place, then gently lift it out of the phone.

Step 5: Replace with the New Component

Place the new component in the spot where the old one was removed. Make sure that it fits correctly and secure it with the screws that were previously removed.

Step 6: Reconnect the Battery

Reconnect the battery connector that was previously disconnected.

Step 7: Reattach the Back Cover

Align the back cover with the device and press gently till it clicks into its place.

Now you have successfully replaced the Cubot Cheetah component.