Cubot H3 repuestos

Cubot H3 Repuestos Specifications

The Cubot H3 smartphone is a budget-friendly device produced by a Chinese manufacturer. Here we detail some key specifications:

• Display: 5.0 inch 1280 x 720 Pixel screen.
• CPU: MTK6737 Quad Core 1.3GHz.
• System: Android 7.0.
• RAM + ROM: 3GB RAM + 32GB ROM.
• Camera: 8.0MP rear camera + 5.0MP front camera.
• Battery: High capacity 6000mAh.

Replacing Cubot H3 Repuestos

Before we start, it's important to understand that disassembling your Cubot H3 Repuestos smartphone should only be done by an experienced individual or a professional technician to prevent accidental damage. Here are the steps:

Tools Needed:

• Phillips head screwdriver.
• Spudger tool.
• Tweezers.
• Plastic opening tools.

Steps to Replace Cubot H3 Repuestos:

• Step 1: Turn off your Cubot H3 and remove the SIM card tray.
• Step 2: Using the Phillips head screwdriver, remove the screws on the case's bottom.
• Step 3: Use a plastic opening tool carefully to pry open the phone. Start from one side and work your way around.
• Step 4: You will see the internal components. Use the tweezers and the spudger tool to carefully remove and replace the desired part.
• Step 5: Once the part is replaced, assemble the phone in the reverse order of disassembly.

Note:

• Be cautious not to damage other components while replacing the part.
• Be sure to power up the device to test the replaced repuestos function correctly before completely assembling the device.