Cubot King Kong 3 spare parts

Cubot King Kong 3 Specifications

The Cubot King Kong 3 offers a robust feature set optimized for the rugged smartphone market. Below are its key characteristics:

• Display: 5.5-inch IPS, 720 x 1440 pixels
• CPU: MediaTek Helio P23 MT6763T, Octa-core, 2300 MHz
• RAM: 4GB
• Storage: 64GB expandable via microSD
• Battery: 6000 mAh, Non-removable
• OS: Android 8.1 Oreo

Replacement Instructions for Cubot King Kong 3 Repuestos

Follow the detailed instructions below to replace the repuestos of your Cubot King Kong 3. Before you start, ensure you have the necessary replacement repuestos and tools ready.

Preparation:

• Power off your Cubot King Kong 3 phone completely.
• Remove your SIM card and SD card if any present.

Step 1: Removing the Back Cover:

Remove the screws attaching the back cover using the appropriate screwdriver. Once all screws are removed, gently lift the back cover.

Step 2: Disconnecting the Battery:

Find the battery connector on the board. Carefully disconnect it by applying gentle force with a plastic pry tool.

Step 3: Replacing Repuestos:

Determine the repuesto you want to replace, whether it's the camera, motherboard, or screen. Carefully remove the old parts and install the replacement, ensuring a firm but careful fit. Notice that each repuesto may require additional disconnection of ribbons and connectors — be attentive.

Step 4: Reassembling the phone:

Once the repuesto(s) are in place, reconnect the battery and place the back cover. Reinstall the screws to secure the back cover firmly.

Please remember: DIY phone repair can void your warranty and can potentially harm your device if done incorrectly. Refer to a professional if unsure.