Cubot King Kong 9 spare parts

Cubot King Kong 9 Technical Specifications

The Cubot King Kong 9 is a rugged smartphone designed to resist harsh conditions. Presented below are its technical specifications.

• Screen: FHD+ Dot Drop Display, 6.3 Inch, 1080x2340 pixels, Corning Gorilla Glass
• Processor: MediaTek Helio P60 (MT6771), Octa-Core, 2.0GHz
• RAM: 8GB LPDDR4X
• Storage: 128GB, expandable up to 256GB via MicroSD
• Operating System: Android 11
• Camera: Triple Rear camera of 48MP + 20MP + 0.3MP and 32MP Front Camera
• Battery: 6000mAh, Non-removable, with 18W Fast Charging

Instructions on How to Replace Cubot King Kong 9 Repuestos

Tools Required

You'll need a screwdriver, a pry tool, and a new battery part.

Steps in Replacing Parts

Please ensure you are grounded to prevent static damage to your device. Also, take a backup of your data before proceeding.

• Step 1: Turn off the device and remove the SIM tray.
• Step 2: Remove the screws on the back cover using the screwdriver.
• Step 3: Using the pry tool, carefully lift the back cover, starting from the bottom.
• Step 4: Once the back cover is removed, you'll see the internal parts of the device. Locate the battery.
• Step 5: Remove the screws securing the battery. Carefully disconnect the battery connector from the motherboard.
• Step 6: Replace the old battery with the new one. Ensure to connect the battery connector to the motherboard.
• Step 7: Before you reassemble, turn on the device to check if the new battery is functioning properly. If everything is working, turn off the device again.
• Step 8: Reattach the back cover and secure it using the screws.

Remember to follow the manufacturer’s guidelines and instructions when handling and replacing device parts.