Cubot King Kong Power spare parts

Cubot King Kong Power Repuestos - Technical Specifications

The Cubot King Kong Power is a highly durable smartphone designed for heavy use and extreme conditions. Here are some of its main components:

• Screen: 5.5 inches IPS, 720 x 1280 pixels
• Processor: MediaTek MT6739, Quad-Core, 1.3 GHz
• RAM: 3 GB
• Storage: 32 GB, expandable via MicroSD up to 64 GB
• Battery: 6000mAh, Non-removable
• Cameras: 13.0 MP rear camera and 8.0 MP front camera
• Operating System: Android 9.0

Instructions for Replacing Cubot King Kong Power Repuestos

Note: It's strongly recommended to take your phone to a professional if you're not confident in your ability to replace the parts yourself.

How to replace the screen

The screen is one of the most commonly damaged parts on any smartphone. Here's a guide on how to replace it:

• Use a heat gun or hair dryer around the edges of the screen to melt the adhesive holding it in place.
• Carefully use a plastic opening tool to pry the screen away from the phone body.
• Disconnect the screen's ribbon cable from the motherboard, and the old screen can now be removed.
• Install the new screen by reconnecting the ribbon cable, then carefully pushing the new screen into place.
• Heate the edges again until the new screen's adhesive sticks to the phone body.
• Turn on the device to test the new screen.

How to replace the battery

If your battery isn't holding a charge like it used to, it might be time for a new one. Here's how:

• Turn off the device.
• Remove the phone's back panel with a plastic opening tool.
• Locate the battery's connector on the motherboard and carefully disconnect it.
• Remove the old battery.
• Install the new battery by connecting it to the motherboard, then place it carefully into the phone.
• Reinstall the back cover, and turn on the device to test the new battery.