Cubot Max 3 spare parts

Cubot Max 3 Repuestos Technical Details

The Cubot Max 3 is a high function smartphone that boasts the following technical specifications:

• Screen: 6.95 Inches, 720 x 1640 pixels, 16M colors, IPS LCD
• Processor: MediaTek Helio P22, Octa-core (2x2.0 GHz & 6x1.8 GHz)
• Memory: 4GB, 64GB, expandable up to 128GB via microSD card
• Battery: 5000 mAh, Li-Polymer
• Operating System: Android 10
• Camera: Rear- 48 MP + 0.3 MP, Front- 8.0 MP

Instructions for Replacing Cubot Max 3 Repuestos

The following instructions detail how to replace key components of the Cubot Max 3 smartphone. Please ensure to switch off your device and remove the battery before you start the process.

Screen Replacement

• Start by removing the screws at the bottom of the device.
• Use a plastic tool to pry open the back cover.
• Disconnect the battery connector carefully.
• Unscrew the protecting cover of the motherboard and carefully disconnect the LCD flex cable.
• Replace the old screen with the new one and reverse the process to reassemble the phone.

Battery Replacement

• After removing the back cover as stated above, unscrew the screws holding the battery in place.
• Use a plastic tool to pry out the old battery, being careful not to damage the surrounding components.
• Place the new battery in position, replace the screws and reverse the disassembly process.

Always remember to safely dispose of old components in accordance with local regulations. If you are unable to personally perform these actions, please take your device to a certified technician.