Cubot Note 20 spare parts

Cubot Note 20 Repuestos - Technical Specifications

The Cubot Note 20 is a well-known budget-friendly smartphone with impressive specifications. Here are some of the main specifications of the device:

• Display: 6.5 inches, 720 x 1600 pixels, IPS display.
• Processor: MediaTek MT6771 Helio P60 Octa-core.
• RAM and Storage: 3GB RAM, 64GB built-in storage.
• Camera: Quad-camera setup - 12 Megapixels main, 20 Megapixels depth, 0.3 Megapixels third sensor, 0.3 Megapixels fourth sensor.
• Battery: 4200mAh

How to replace Cubot Note 20 Repuestos (Part Replacement)

Disclaimer

Before starting, note that this replacement process will void your warranty and you're doing it at your own risk.

What You Need

Here are the tools you will need to replace the Cubot Note 20 repuestos:

• Phillips screwdriver
• Spudger tool
• Tweezers
• Plastic opening tools
• New Cubot Note 20 repuestos

Instructions

Here are the steps to replace the Cubot Note 20 repuestos:

1. First, switch off the device.
2. Remove the back cover using a plastic tool, moving the tool around the edges to gently pry open.
3. Unscrew the screws securing the frame using the Phillips screwdriver.
4. Remove the frame from the device using the spudger tool.
5. Disconnect the battery connector using the spudger tool.
6. Remove the faulty part and replace it with the new one.
7. Reconnect the battery connector.
8. Replace the frame and screw back the securing screws.
9. Place the backing on the device, ensuring it snaps into place on all sides.
10. Switch on the device and check if the new component is functioning as expected.

Please be careful to follow these instructions step by step to ensure a successful replacement of the parts in question.