Cubot Note 7 spare parts

Technical Characteristics of Cubot Note 7 Repuestos

The Cubot Note 7 Repuestos come with the following key features:

• Display: An HD+ liquid touchscreen with a resolution of 540 x 1200 pixels.
• Processor: It is powered by a MediaTek MT6737 Quad-Core Processor.
• Memory: It boasts a 2GB RAM alongside a built-in 16GB ROM expandable to 128GB with a memory card.
• Battery: Cubot Note 7 is powered by a Li-Ion 3100 mAh, non-removable battery.
• Camera: It comes with a 13MP rear camera, and an 8MP front camera for selfie lovers.
• OS: It runs on Android 10 OS, guaranteeing optimized performance.

Instructions on How to Replace Cubot Note 7 Repuestos

Prerequisites

Before beginning the repair process, ensure you have the following tools: a plastic opening tool, a Philips #00 screwdriver, tweezers, a spudger, and a new Cubot Note 7 Repuestos part that you intend to replace.

Steps to Replace the Part

1. Turn off the Cubot Note 7 phone and remove the SIM card tray.
2. Use the plastic opening tool to gently separate the rear case from the frame. Begin this process from the bottom of the phone.
3. Remove the 14 Philips #00 screws attached to the mid-frame and use spudger to carefully lift the mid-frame from the phone.
4. Carefully unclip the battery connector using tweezers. To do this, simply grasp and gently pull the connector out of its socket on the motherboard until it unplugs.
5. To replace the camera, locate the connector on the back of the motherboard and use the spudger to unplug it.
6. Place the new camera into position, ensuring that it's facing the right way. Reconnect the camera to the motherboard.
7. For other components such as the screen, battery or charging connector, repeat the similar steps: locate, unplug the connectors, replace the component and then reconnect the connectors.
8. Finally, reassemble the phone by following the steps in reverse order. Attach the mid-frame, screw it in, then clip on the rear case.
9. Turn on the phone and test the functionality of the changed part.

Remember, while performing these steps, take special care not to apply excessive pressure that might break or damage parts of the phone. Furthermore, ensure that the phone is turned off throughout the entire process to prevent electric shock.