Cubot Note Plus spare parts

Technical Characteristics of Cubot Note Plus Repuestos

The Cubot Note Plus is a standout smartphone known for its reliability and smooth performance. Here are some of the technical characteristics:

• Screen: 5.2 inches, Full HD resolution
• Processor: Quad-core 1.5 GHz
• RAM: 3GB
• Storage: 32GB, expandable up to 128GB via MicroSD
• OS: Android 7.0 Nougat
• Camera: 13MP rear camera, 13MP front camera
• Battery: 2800mAh

Instructions to Replace Cubot Note Plus Repuestos

The following steps explain how to replace Cubot Note Plus Repuestos. Always ensure that you handle parts with care to avoid damaging the device.

Requirements

• Replacement repuestos for Cubot Note Plus
• Precision screwdriver set
• Tweezers
• Plastic pry tools

Steps to Replacing the Repuestos

Note: Turn off the phone and remove the SIM card tray before beginning.

1. Remove the back cover:

   Use the plastic pry tool to gently lift the back cover from the edges. Be careful not to apply too much force to avoid cracking the cover.

2. Unscrew the holding screws:

   Use the precision screwdriver to remove the screws securing the inner components. Keep the screws in a safe place.

3. Remove the battery connection:

   Use the plastic pry tool to disconnect the battery connector from the motherboard.

4. Remove the desired repuesto:

   Identify the part you wish to replace (e.g., camera, loudspeaker, etc.) and carefully disconnect it from the motherboard using the pry tool and tweezers.

5. Install the new repuesto:

   Place the new part in the same location as the old one, ensuring all connectors are firmly attached to the motherboard.

6. Reassemble the phone:

   Reconnect the battery, replace the inner cover and screws, and reattach the back cover. Ensure that everything is securely in place.

Power on your Cubot Note Plus to test the newly installed components. If the device doesn't function as expected, go through the steps again to ensure all the connections are secure.