Cubot P40 spare parts

Cubot P40 Repuestos Technical Characteristics

The Cubot P40 comes with several components that are designed to work together seamlessly:

• Display: 6.2-inch In-cell IPS screen with 1520 x 720 pixel resolution.
• Processor: MediaTek Helio A22 Quad Core 2.0GHz
• RAM: 4GB
• Rom: 128GB
• Cameras: Front camera 20.0MP, Back camera 12.0MP + 2.0MP + 2.0 MP
• Battery: 4200mAh (Non-removable)
• Operating System: Android 10.0

Instructions for Replacing Cubot P40 Repuestos

Handle this procedure with care as smartphone parts might be sensitive. Follow these steps:

1. Turn off the Phone

Always ensure your Cubot P40 is switched off before starting the repair process to avoid any electrical mishaps.

2. Remove the SIM Card Tray

Using the SIM ejector tool, remove the SIM card tray from the device and set it aside.

3. Open the Back Cover

Use a specific mobile phone pry opening tool to gently open the back cover of the Cubot P40.

4. Disconnect the Battery

Disconnect the battery connector from the motherboard.

5. Remove the Relevant parts

Depending on what you're replacing, gently remove the damaged parts such as the screen, battery, or cameras.

6. Install New Parts

Place the new parts carefully in their respective positions and ensure they are properly connected where necessary.

7. Reassemble the Phone

Finally, reconnect the battery, replace the back cover, and insert the SIM card tray back into the phone. Turn your Cubot P40 and confirm that all the new components are working correctly.

Note: Always handle smartphone components with care, use the correct tools, and ensure you're grounded to avoid any static electricity which might damage the electronic parts.