Cubot P80 spare parts

Cubot P80 Technical Characteristics

The Cubot P80 is a powerful affordable smartphone with noteworthy specifications. It's important to understand these specifications before proceeding with the repair or replacement process of any part.

• Display: 5.5 inch, 720P HD IPS
• System: Android 10.0
• CPU: Quad-Core 1.3GHz
• RAM and Storage: 2GB RAM and 16GB storage, expandable to 128GB
• Camera: Rear Camera 8MP, Front Camera 5MP
• Battery: 4200mAh removable

Replacing Cubot P80 Repuestos: A Step-by-Step Guide

Before attempting to replace any part of Cubot P80, make sure you have the necessary tools such as: Small Phillips screwdriver, tweezers, plastic opening tools, etc.

Part 1: Battery Replacement

• Step 1: Turn off the device and remove the back cover.
• Step 2: Unplug the battery connector from the motherboard.
• Step 3: Carefully remove the old battery and replace it with a new one.
• Step 4: Reconnect the battery connector to the motherboard and replace the back cover to finish the process.

Part 2: Screen Replacement

• Step 1: After turning off the device and removing the back cover, disconnect the LCD cable connector from the motherboard.
• Step 2: Heat the front of the device with a hair dryer or heat gun to soften the adhesive holding the screen.
• Step 3: Carefully lift and remove the damaged screen from the device using a plastic opening tool.
• Step 4: Replace with the new screen and reconnect the LCD cable connector.
• Step 5: Replace the back cover to finish the process.

Please consult a professional if you are unsure about any stages of the replacement process to avoid any warranty void or further damage to your device.