No products
Prices are tax included
August
The store will remain open as usual in the mornings; only online orders can be picked up in the afternoons.
Orders placed online will continue to be shipped as usual, with the usual pickup times except for Nacex, where the latest order time is 5:45 p.m.
Cubot Quest Lite 2019 spare parts
There are 18 products.Cubot Quest Lite 2019 Technical Specifications
The Cubot Quest Lite 2019 features a rugged design and solid performance specs. A brief outline of the key technical characteristics is detailed below:
- Display: 5.0-inch (1280 x 720 pixels) HD display
- Processor: MediaTek MT6761 quad-core processor
- RAM and Storage: 3GB RAM with 32GB internal ...
Cubot Quest Lite 2019 Technical Specifications
The Cubot Quest Lite 2019 features a rugged design and solid performance specs. A brief outline of the key technical characteristics is detailed below:
- Display: 5.0-inch (1280 x 720 pixels) HD display
- Processor: MediaTek MT6761 quad-core processor
- RAM and Storage: 3GB RAM with 32GB internal storage, expandable up to 128GB with microSD
- OS: Android 9.0 (Pie)
- Camera: 13MP rear camera with LED flash, 8MP front-facing camera
- Battery: 3000mAh lithium battery
Instructions to Replace Cubot Quest Lite 2019 Repuestos (Parts)
Prior to beginning, ensure that you have the correct replacement parts and necessary tools.
Tools Needed
- Screwdriver
- Plastic pry tool (spudger)
- Tweezers
- Replacement parts
Instructions
Every replacement procedure starts with switching off the device and removing the SIM tray.
1. Disassembling the Device
- Unscrew the two screws at the bottom the phone.
- Eject the SIM tray using the SIM eject tool.
- Insert a plastic pry tool between the screen and the rear panel. Slide it around the perimeter of the phone to release the plastic clips holding the panel in place.
- Once the rear panel is free, gently lift it and disconnect the battery connector from the motherboard.
2. Changing the Desired Component
At this stage, depending on the part you want to replace, follow the respective instructions.
Note: Refer to a detailed component guide to identify various components and their connectors.
3. Reassembling the Device
- After replacing the faulty part, reconnect the battery.
- Place the rear cover back on the phone aligning carefully with the buttons, and then press firmly to snap the clips back into place.
- Tighten the two screws at the bottom and insert the SIM tray back.
Now, your Cubot Quest Lite should be working like new again!
Note: This guide provides generalized instructions. Certain steps may vary, depending on the specific part being replaced. If uncertain, seeking help from a professional is advised.
Less
