Cubot R15 Pro spare parts

Technical Characteristics of Cubot R15 Pro Repuestos

The Cubot R15 Pro is a smartphone designed by Cubot company featuring several outstanding technical qualities. Here are the technical details and specifications:

• Model: Cubot R15 Pro
• Display: 6.26 inch, 720 x 1520 pixels
• Operating System: Android 9.0
• RAM: 3GB
• ROM: 32GB
• Battery: 3000mAh
• Processor: Quad-Core 2.0GHz
• Front Camera: 8.0MP
• Rear Camera: 13.0MP + 2.0MP
• Connectivity: WiFi, 4G, Bluetooth 4.2
• Other features: Dual SIM, Gravity Sensor, GPS, Proximity Sensor

Instructions to Replace Cubot R15 Pro Repuestos

Replacing internal components of the Cubot R15 Pro requires a careful and intricately detailed process. Below are the steps outlining the whole process:

Tools Needed

• Screwdriver kit
• Plastic pry-opening tools
• Pair of tweezers
• Hot air gun

Disassembly Process

The following steps explain the disassembly process:

1. Switch off the device.
2. Remove the SIM card tray.
3. Use the hot air gun to gently warm up the edges of the back cover. This will loosen the adhesive.
4. Use the plastic pry-opening tool to gently separate the back cover from the chassis.
5. Unscrew the screws using the screwdriver to remove the steel plate covering the motherboard.

Replacing Parts

Once the device has been disassembled, you can access and replace internal parts:

1. Unplug the battery connector from the motherboard.
2. Locate the faulty part that needs to be replaced.
3. Unscrew and carefully remove the faulty part.
4. Replace it with the new, working part.
5. Test the device thoroughly to make sure it’s working properly with the new part.

Reassembly Process

To reassemble the device, simply follow the disassembly steps in reverse order. Ensure everything is screwed in tightly and correctly placed.