Cubot R19 spare parts

Cubot R19 Repuestos Technical Characteristics

The Cubot R19 comprises several parts that contribute to its robust performance. Here are the notable technical characteristics:

• Display: 5.71" HD Display
• Resolution: 720 x 1520 pixels
• Processor: MT6761, Quad-Core, 2.0GHz
• Storage: 32GB (expandable to 128GB)
• Operating System: Android 9.0
• Battery: 2800mAh detachable battery
• Rear Camera: 13MP+2MP dual camera
• RAM: 3GB

Instructions for Replacing Cubot R19 Repuestos

Replacing components of the Cubot R19 requires precision and care. Here’s a step-by-step guide:

Tools Required

• Micro Phillips Screwdriver
• Spudger
• Suction Handle
• Heat gun

Step-by-Step Guide

Before starting, ensure the device is switched off and unplugged from all power sources to avoid electric shock or damage.

• Step 1: Using the heat gun, gently warm the edges of the Cubot R19's screen to soften the adhesive.
• Step 2: Place the suction handle on the screen and gently lift to create a small separation between the screen and the frame.
• Step 3: Insert the spudger into the gap and slide it around the screen's perimeter to cut the adhesive.
• Step 4: Once the screen is removed, unscrew the small screws around the frame with the Micro Phillips Screwdriver.
• Step 5: Use the spudger again to disconnect the battery.
• Step 6: All other components like camera, processor can now be accessed and replaced as needed.

Please note, these steps require intricacy, and if not done correctly, it may lead to further damage. If you are not confident, it is advisable to take the phone to a qualified service technician.