Cubot R9 spare parts

Technical Specifications for Cubot R9 Repuestos

The Cubot R9 repuestos are the replacement parts designed to fit precisely in a Cubot R9 smartphone. Some of the key components of the R9 include:

• Display: 5.0-inch HD display with 720 x 1280 pixel resolution
• Camera: Rear camera is 13.0MP, and front camera is 5.0MP
• Battery: 2600mAh, non-removable
• OS: Powerful Android 7.0
• Processor: MT6580, Quad-Core, 1.3GHz
• RAM: 2GB RAM
• Storage: 16GB storage, expandable up to 32GB via MicroSD

Replacing Cubot R9 Repuestos

The step-by-step guide will help you in replacing the Cubot R9 repuestos:

Disclaimer

Make sure you switch off the phone before starting and remove the SIM card tray and the SD card if any. Be careful with the parts to avoid damage.

Step 1: Removing the Back Cover

Take a thin prying tool and slowly move it around the edges of the phone to remove the back cover.

Step 2: Removing the Battery

There are a few screws holding the battery in place. With a T5 Torx screwdriver, remove these screws.

Step 3: Removing the Screen

Remove more screws from around the screen area with the T5 Torx screwdriver. Lift the screen gently and remove.

Step 4: Replacing with New Repuestos

After removing the old parts, put the new Cubot R9 repuestos in place following the above steps in reverse order.

Note:

Always ensure the phone is off and you are grounded to prevent static electricity. Do the process slowly and patiently to avoid damage.