Cubot S208 spare parts

Cubot S208 Repuestos Technical Specifications

The Cubot S208 Repuestos comprises of various parts including battery, screen, motherboard, front and rear camera, sound and vibrator parts, and charging ports. Here are the technical details:

• Battery: 2000mAh Li-ion.
• Screen: 5.0 inch QHD 960x540 pixels.
• Motherboard: Works with MT6582, Quad-core, 1.3GHz processing unit.
• Front Camera: 5.0 MegaPixel.
• Rear Camera: 8.0 MegaPixel with flash light and auto focus.
• Sound and Vibrator Parts: Standard quality sound system and vibration unit.
• Charging Port: Standard micro-USB port.

Instructions to Replace Cubot S208 Repuestos Parts

Tools Needed:

A plastic opening tool, small Phillips screwdriver, spudger, tweezer, heat gun or hair dryer

Replacing the Battery:

1. Switch off the Cubot S208 and using the plastic opening tool, carefully open the back cover.

2. Remove the battery, gently lifting it with the plastic opening tool from the slot.

3. Place the new battery in the slot, ensuring the correct orientation.

4. Replace the back cover and power on the device.

Replacing the Screen:

1. After turning off the device, remove the back cover and battery.

2. Unscrew the screws holding the front panel using a Phillips screwdriver.

3. Using a plastic opening tool, pry open the front panel. Note: if the screen is adhered, use a heat gun or hair dryer to warm the adhesive first.

4. Once open, disconnect the display’s connector from the motherboard with a spudger.

5. Replace the old screen with the new one and connect it to the motherboard.

6. Fix the front panel back, screw it in place, and re-place the battery and the back cover.

Other Components:

Other parts like the camera, sound and vibrator parts, and the charging port all need to be replaced by a professional as they require detailed understanding and handling of the smartphone’s motherboard.