Cubot X19 spare parts

Technical Specifications of Cubot X19 Repuestos

The Cubot X19 Repuestos is a high-quality replacement part for the Cubot X19 smartphone. The technical specifications include:

• Compatibility: Only compatible with Cubot X19
• Condition: 100% Brand new
• Type of Part: LCD Display + Touch Screen Digitizer Assembly
• Resolution: 1080 x 2160 Pixels
• Quality: Tested before shipping and 100% working well

Instructions for Replacing Cubot X19 Repuestos

Tools Needed

You'll need a few tools before you start the replacement process:

• Small Phillips screwdriver
• Pry tool or plastic opening tool
• Tweezers

Steps for Replacement

Follow the steps below to replace the Cubot X19 repuestos:

• Step 1: Power off your Cubot X19 and remove the SIM card and SD Card Tray.
• Step 2: Remove the two screws at the bottom of the device near the USB port.
• Step 3: Use the pry tool to gently lift the back panel off the device.
• Step 4: Remove all screws securing the motherboard and disconnect all connecting cables.
• Step 5: Remove the broken LCD Display carefully.
• Step 6: Place the new LCD Display + Touch Screen Digitizer Assembly onto the device.
• Step 7: Reconnect all cables and secure the motherboard.
• Step 8: Replace all screws and finally fix the back panel.
• Step 9: Power on your Cubot X19 to ensure everything is functioning correctly.

Note: It is recommended to test the new part before completing installation. If you have any trouble during installation, seek professional assistance.