Cubot X30 spare parts

Cubot X30 Repuestos Technical Specifications

The Cubot X30 smartphone has an impressive design backed by powerful technical features. Here are the key technical characteristics of the Cubot X30 repuestos.

• Display: 6.4 inch Full HD+ with resolution 1080 x 2310 pixels
• Processor: MediaTek Helio P60 Octa-Core 2.0GHz
• RAM: Comes in two variants - 6GB and 8GB
• Storage: Comes in two variants - 128GB and 256GB
• Camera: Five lens camera setup with 48Mp main camera
• Battery: 4200mAh lithium battery
• Operating System: Android 10

Instructions for Replacing Cubot X30 Repuestos

Replacing parts in your Cubot X30 requires specialized tools and careful precision. Follow these steps:

Preparation

• Power off your device to avoid any electrical interference.
• Remove the SIM card and the microSD card if present.

Replacing the Back Cover

• Using a suction cup, carefully remove the back cover.
• Replace the old back cover with the new one.

Replacing the Battery

• Unscrew the protective cover securing the battery.
• Disconnect the battery connector and replace the old battery with a new one.

Finishing Up

• After replacing the required parts, reassemble the phone carefully.
• Make sure to fix the back cover securely.
• Power on your device to check the functionality of the replaced parts.

Note: It is recommended only for people with technical expertise in phone repair. If you are not confident, seek service from a professional.