Cubot X70 spare parts

Cubot X70 Repuestos Technical Specifications

The Cubot X70 repuestos are parts designed specifically for the Cubot X70 smartphone. Here are the key specifications:

• Display: 5.5-inch IPS, 720 x 1440 pixels, 18:9 ratio (~293 ppi density)
• Platform: Android 11, Unisoc SC7731E
• Memory: 3GB RAM, 32GB internal storage
• Camera: 13 MP, f/2.2, AF, Dual-LED flash
• Battery: Removable Li-Ion 5000 mAh battery

Instructions for replacing Cubot X70 Repuestos

These instructions will guide you on how you can replace the Cubot X70 repuestos step by step.

Tools required

• Small Phillips-head screwdriver
• Plastic opening tools
• Tweezers

Disassembly

Before you begin, ensure your device is powered off.

• Remove the back cover of the phone using a plastic opening tool.
• Progressively remove the screws using the Phillips-head screwdriver.
• Use the plastic opening tool to disconnect the battery connector.

Parts Replacement

At this stage, you'll be able to replace any necessary parts.

• If replacing the display, disconnect the display connector and remove the old screen. Position the new screen and connect the display connector.
• If replacing the battery, simply remove the old battery and put the new one in place.
• If replacing memory or the camera, manipulate the connectors with tweezers and swap the old hardware with the new parts.

Reassembly

Reverse the disassembly process for reassembly.

• Reconnect the battery connector and screw in the screws that were previously removed.
• Finally, replace the back cover of the phone.

And there you have it, you've successfully replaced your Cubot X70 repuestos!