Touch screen Cubot

Technical Characteristics of Pantalla táctil Cubot

The Pantalla táctil Cubot is a high-quality smartphone screen designed for Cubot phones. With an impressive resolution and touch response, this screen provides excellent clarity and precision for daily tasks or multimedia experiences.

• Screen Size: Usually, a 5.5-inch or 6.2-inch IPS LCD Full HD display.
• Resolution: Depending on the model, it can offer resolutions of 720 x 1560 pixels to 1080 x 2310 pixels.
• Touch Capability: Multi-touch capacitive screen, supporting several touch points simultaneously.
• Technology: IPS- LCD technology for better color reproduction and wider viewing angles.

Instructions to replace the Pantalla táctil Cubot

Please ensure that you carefully follow these instructions to avoid any potential damage to the device during the replacement process.

Tools Required

• Screwdriver.
• Plastic opening tools.
• Tweezers.
• Heat gun or hair dryer.

Replacement Process

• Turn off the phone and remove any SIM card or SD card.
• Heat the edges of the phone front panel to soften the adhesive. You can use a heat gun or a hairdryer for this purpose.
• With the use of a plastic opening tool, slowly pry open the screen from the rest of the phone.
• Once the screen is separated, unscrew and remove any plates covering the screen ribbon connectors.
• Detach the screen ribbon connector using the tweezers.
• Clean the phone surface and reapply the adhesive.
• Attach the new Pantalla táctil Cubot by connecting it to the screen ribbon connector.
• Reattach the plate over the connectors and screw it back in place.
• Press the screen onto the surface of the phone to ensure a secure connection.
• Turn on the phone and check if the new screen is functioning correctly.

Please note: Be gentle when removing the old screen as too much force might cause it to shatter and cause injuries. Remember to put on safety glasses.