Doogee F7 Pro spare parts
There are 3 products.Doogee F7 Pro Repuestos Technical Characteristics
The Doogee F7 Pro Repuestos is a spare part for the Doogee F7 Pro smartphone. It is designed to match the original specifications of the device, ensuring functionality and performance. Below are its technical characteristics:
- Screen Size: 5.5 inches
- Resolution: 1920 x 1080 pixels
- P...
Doogee F7 Pro Repuestos Technical Characteristics
The Doogee F7 Pro Repuestos is a spare part for the Doogee F7 Pro smartphone. It is designed to match the original specifications of the device, ensuring functionality and performance. Below are its technical characteristics:
- Screen Size: 5.5 inches
- Resolution: 1920 x 1080 pixels
- Processor: Deca-Core 2.3GHz
- RAM: 4GB
- Storage: 32GB
- Battery: 4000mAh
- OS: Android 6.0 Marshmallow
- Camera: 21.0MP rear, 8.0MP front
Instructions for Replacing Doogee F7 Pro Repuestos
To replace the spare parts on your Doogee F7 Pro, follow the detailed steps below. Note: Tools necessary for this operation are a small Phillips head screwdriver, a spudger, and a plastic opening tool.
- Turn off your device and remove the SIM card tray.
- Unscrew the two screws at the bottom of the device, then use the plastic opening tool to pry open the back cover. Start from the bottom and slowly work your way around.
- Once the cover is removed, you'll see the battery and the motherboard. Use the Phillips head screwdriver to remove the screws holding the battery connector and disconnect the battery.
- Remove the screws holding the motherboard in place and carefully lift it up.
- Disconnect the ribbon cables attached to the motherboard. Ensure you do this carefully to avoid damaging the connectors.
- With the motherboard and connectors detached, you can now replace the necessary parts (like the screen, battery, camera, etc.). Be sure to match the replacement parts with their corresponding connectors on the motherboard.
- Once the faulty parts have been replaced, reattach the ribbon cables to the motherboard and carefully place it back in position. Screw the motherboard back down.
- Reconnect the battery, screw the connector back in and replace the back cover. Ensure it clips in securely all around the phone.
- Screw the two screws back at the bottom and replace the SIM card tray.
- Turn on your device to check if it's working properly with the new repuestos.
Remember, always exercise caution when working with electronic devices. If you are unsure about any of the steps, consider getting help from a professional.
Less More
Disponible
Out of stock
Out of stock