Doogee N20 Pro spare parts

Technical Characteristics of Doogee N20 Pro Repuestos

The Doogee N20 Pro is a versatile smartphone that boasts several key features. The key characteristics of the Doogee N20 Pro repuestos are:

• Display: 6.3-inch FHD+ Waterdrop Screen, 2280*1080 Pixel resolution.
• CPU: Helio P60 2.0GHz Octa Core
• System: Android 10
• RAM + ROM: 6GB RAM + 64GB storage expandable with a TF Card up to 256GB
• Camera: Quad Rear Camera 16.0MP + 8.0MP + 2.0MP and Front 16.0MP camera
• Battery: 4400mAh, supports fast charging

Replacement Instructions for Doogee N20 Pro Repuestos

Tools Needed:

• Small Phillips Screwdriver
• Nylon Spudger
• Plastic Pry Tool

Instructions:

Follow these steps to replace the Doogee N20 Pro repuestos:

• Step 1: Power off your Doogee N20 Pro and remove the SIM Card Tray.
• Step 2: Use the plastic pry tool to slowly create separation between the back cover and the inner frame. Move around the frame gradually to loosen the entire back cover.
• Step 3: Once the back cover is off, you will see several screws holding down the protective plate over the motherboard. Unscrew these using your Phillips Screwdriver.
• Step 4: Use your nylon spudger to disconnect the battery connector, display connector, and any other connectors attached to the motherboard.
• Step 5: Again with the screwdriver, unscrew any screws holding the motherboard in place. Once all are off, gently remove the motherboard.
• Step 6: Now, all components should be accessible for you to replace as needed. Replace the defective components and then follow these steps in reverse to reassemble the device.