Doogee N40 Pro spare parts

Doogee N40 Pro Technical Characteristics

The Doogee N40 Pro is a rugged smartphone boasting impressive features suitable for extreme conditions. This fully-featured phone is lauded not only for its outstanding performance but also for its resilience to adverse conditions like shocks, water, and dust.

• Display: 6.52 inch HD+ 720*1600, IPS, 450cd/cm².
• CPU: Helio P60 12nm, up to 2.0GHz, Octa-Core.
• RAM: 6GB
• ROM: 128GB, supports up to 256GB TF card.
• Battery: 6380mAh with 24W Flash Charge.
• Camera: 20MP front camera; Back camera: 20MP+8MP+2MP.

Instructions for Replacing Doogee N40 Pro Repuestos

Replace the Doogee N40 Pro parts by following the instructions carefully. Always ensure to work in a dust-free environment and keep a data backup before initiation.

Tools Recommended

• Eject pin
• Screwdriver
• Opening tool or prying tool

Steps to replace parts

• Power off the device and remove the Sim tray using the eject pin.
• Unscrew the two pentalobe screws at the bottom of the phone.
• Using the opening tool, carefully pry the screen starting from the bottom and work your way around, unclipping the catchers.
• Now that the screen is removed, you will have access to the parts inside. Identify the defective part(s).
• Unscrew and gently remove the damaged parts, being careful not to damage adjacent parts.
• Replace with the new part and screw safely into the appropriate slot.
• Reattach the screen and press gently around the edges to secure the clips.
• Re-insert the sim tray and power on the device.

Ensure to follow these steps accurately. Remember, if the damage is severe or you are uncertain about the process, it's highly recommended to consult a professional or authorized service center.