Doogee S59 Pro spare parts

Technical Characteristics of Doogee S59 Pro Repuestos

The Doogee S59 Pro is a rugged, high-performance smartphone with a host of impressive features. Here are the relevant technical characteristics of its component parts or 'repuestos':

• Display: 5.71" IPS Display with 1520x720 pixel resolution
• Processor: MediaTek Helio P22 MT6762, Octa-Core
• Memory: 4GB of RAM with 128GB internal storage
• Battery: 10050mAh Lithium Polymer
• Operating System: Android 10
• Rear Camera: Quad camera module with 16MP main camera
• Front Camera: Single 16MP camera

Instructions for Replacing Doogee S59 Pro Repuestos

Before proceeding, please ensure that you have the correct replacement parts for your Doogee S59 Pro. Spare parts can be categorized as screen, battery, camera module, etc.

Tools Required

• Small Phillips Screwdriver
• Spudger
• Tweezers

Procedure

Follow these detailed steps:

1. Turn off your device and remove the SIM tray.
2. Remove the screws at the device corners using the Phillips screwdriver.
3. Use the spudger tool to gently pry open the device. Start from the bottom edge and proceed slowly around the entire device.
4. Once the device is open, identify the component you wish to replace.

Replacing the Battery

1. Disconnect the battery connector.
2. Use the spudger tool to gently remove the battery.
3. Place the new battery and reconnect the connector.

Replacing the Screen

1. Remove the connector attaching the screen to the motherboard.
2. Remove the old screen attachment using the spudger tool.
3. Place the new screen and reconnect the connector.
5. Once the replacement part is securely installed, align the back case and apply pressure to snap it back into place.
6. Reinsert the screws using the Phillips screwdriver.
7. Turn on the device to ensure the replaced parts are functioning correctly.