Doogee S61 S61 Pro spare parts

Doogee S61 Pro Technical Specifications

Before proceeding with the replacement tutorial, let's take a look at the technical aspects of the Doogee S61 S61 Pro smartphone.

• Operating System: Android 11
• Processor: MediaTek Helio P60
• Ram: 8GB
• Internal Storage: 128GB, expandable via MicroSD
• Display: 5.2 inch, FullHD+
• Battery: 8580mAh, supports wireless charging
• Camera: 20MP rear camera, 16MP front camera
• Connectivity: Dual SIM, 4G VoLTE, Wi-Fi, Bluetooth 5.0

Doogee S61 S61 Pro Replacement Guide

Tools needed

• Screwdriver kit
• Pry tool or thumbnail
• Heat gun or hair dryer

Preparation

Ensure to shut down the device before you start and remove the SIM card tray to avoid possible damages.

Step One: Remove the back cover

Heat the back cover with the heat gun or hair dryer to soften the adhesive. Carefully insert the pry tool between the back cover and the chassis of the phone to start removing the back cover. Please proceed with caution to avoid any damages.

Step Two: Remove the battery

After opening the back cover, locate the battery connector and disconnect it. Then, slowly pry the battery out of the case.

Step Three: Replace necessary parts

After removing the battery, you can now access other components of the phone, such as the camera or the motherboard. Replace the necessary part(s) as needed.

Step Four: Reassembly

Once you've replaced the parts, reconnect the new battery, and if possible, apply a new layer of adhesive to ensure the back cover remains secure. Make sure to properly align the back cover with the body of the phone, and firmly press it into place.

Final Steps

After the reassembly, turn on your phone to check if it's functioning correctly with the new parts. If you encounter any issues, it's advisable to consult with a professional.

This wraps up the basic guide for replacing the parts of Doogee S61 Pro.