Doogee S99 spare parts

Doogee S99 Repuestos Technical Specifications

Below are the main technical characteristics of replacement parts - Doogee S99 repuestos:

• Screen: Corning Gorilla Glass, 5.99 inches, 1080 x 2160 pixels, 24 bit
• Camera: 1296 x 1944 pixels, 1440 x 1080 pixels, 30 fps
• Battery: 10000 mAh, Li-Polymer
• Processor: MediaTek Helio P23 (MT6763V), 2017, 64 bit, octa-core, 2300 MHz
• Memory: 6GB RAM + 64GB inbuilt memory, expandable up to 128GB via TF card.
• System: Android 8.1 Oreo
• Connectivity: Bluetooth, GPS, Wi-Fi, 3G, 4G LTE, Dual SIM.

Instructions to Replace Doogee S99 Repuestos

Tools Required

• Small Phillips Screwdriver
• Spudger tool or flathead screwdriver
• Tweezers

Step-by-Step Guide

Before starting, make sure you have all necessary replacement parts and tools ready.

• Step 1: Turn off your Doogee S99 device. This is to prevent any short circuit during the disassembly process.
• Step 2: Carefully remove the back cover of the phone using the Spudger tool.
• Step 3: Remove the battery connector from the motherboard. This will disconnect the battery from the phone.
• Step 4: Locate the small screws that hold the frame and internal components in place. Carefully remove these using your small Phillips screwdriver.
• Step 5: Use the tweezers to carefully remove the parts that need replacing (such as the camera module, processor, etc.), being careful not to damage any nearby components.
• Step 6: Replace the faulty part with the new Doogee S99 repuestos, making sure each component is in the correct place and aligned properly.
• Step 7: Reassemble your phone by following the disassembly steps in reverse, being sure to reattach the battery connector and securely replace the back cover.

Note: Always handle the internal components of your smartphone with care to prevent any damage.