Doogee Voyager DG300 repuestos

Doogee Voyager DG300 Technical Characteristics

The Doogee Voyager DG300 is an Android device with a variety of impressive technical specifications. It will assist you in understanding its inner workings better before moving on to the repair instructions. Here are some of its primary characteristics:

• Operating System: Android 4.2.2
• Display: 5.0 inch IPS capacitive touchscreen
• Resolution: 960 x 540 pixels
• CPU: MTK6572 1.3GHz Dual Core
• RAM + ROM: 512MB + 4GB
• Battery Capacity: 2800mAh
• Camera: 2.0MP (interpolation to 5.0MP) front camera + 5.0MP (interpolation to 8.0MP) rear camera
• Network: Supports 2G: GSM 850/900/1800/1900MHz 3G: WCDMA 850/2100MHz

Instructions to Replace Doogee Voyager DG300 Repuestos

Please follow the below steps to replace Doogee Voyager DG300 repuestos. Note that replacing smartphone components requires careful work to avoid device damage:

Required Tools

• Small Phillips screwdriver
• Plastic opening tools (spudger, plastic card, etc.)
• Tweezers

Steps for Replacement

Follow these steps carefully:

1. Turn off the device: Always start by switching off the phone to avoid any short circuit during the process.
2. Remove the back cover: Use your fingers to gently remove the back cover of the phone.
3. Remove the battery: Remove the battery from its seat. This gives you access to the motherboard.
4. Remove screws: With the small Phillips screwdriver, remove all screws securing the internal components.
5. Remove the plastic frame: Use the plastic opening tools to carefully lift up and remove the plastic frame.
6. Disconnect the flex cables: Carefully disconnect the flex cables connected to the motherboard.
7. Remove the motherboard: Remove the motherboard by gently lifting it from the chassis.
8. Replace the damaged part: Depending on the part you wish to replace, carefully remove the damaged part, and then install the replacement part in its place.
9. Reassemble the phone: Once the replacement is done, reassemble the phone carefully in the reverse order of disassembly.
10. Test the phone: Power on the phone to confirm the successful replacement of the part.

Note

Repairing or replacing components of your smartphone could void the manufacturer's warranty. Execute accordingly.