Doogee Y200 spare parts

    There are 8 products.

    Doogee Y200 Repuestos - Technical Characteristics

    The Doogee Y200 Repuestos is a versatile smartphone designed with numerous sophisticated features. Here are the detailed technical specifications:

    • Display: 5.5 inches, 720 x 1280 pixels, IPS display.
    • Processor: MediaTek MT6735, Quad-core 1.0 GHz Cortex-A53.
    • Storage: 32 GB, expandable up to 128 G...

    Doogee Y200 Repuestos - Technical Characteristics

    The Doogee Y200 Repuestos is a versatile smartphone designed with numerous sophisticated features. Here are the detailed technical specifications:

    • Display: 5.5 inches, 720 x 1280 pixels, IPS display.
    • Processor: MediaTek MT6735, Quad-core 1.0 GHz Cortex-A53.
    • Storage: 32 GB, expandable up to 128 GB via MicroSD.
    • RAM: 2 GB.
    • Camera: Rear - 8 MP, Front - 5 MP.
    • Battery: 3,000 mAh, non-removable.
    • Operating System: Android 5.1 (Lollipop).

    How to Replace Doogee Y200 Repuestos

    Replacing parts in your Doogee Y200 Repuestos requires careful work. Follow these steps:

    Tools needed:

    • Phillips #000 Screwdriver
    • Plastic opening tools
    • Tweezers

    Instructions:

    Step 1: Removing the Back Cover

    • Power off the smartphone and disconnect it from any power sources.
    • Use a thin plastic opening tool to pry open the back cover at the bottom corner.
    • Slowly work your way around the edges. Avoid using excessive force to prevent damage.

    Step 2: Removing the Battery

    • Locate the battery connector which is usually on the upper right corner.
    • Use tweezers to disconnect the connector.
    • Remove the screws securing the battery, and then lift out the battery.

    Step 3: Replacing the New Parts

    • Identify the part that needs to be replaced. This could be the screen, camera, speaker, etc.
    • Remove the screws securing the part, disconnect any connectors, and lift out the part.
    • Place the new part in, connect any connectors, input the screws, and make sure it fits well.

    Step 4: Reassembling the Phone

    • Replace the battery and connect the battery connector.
    • Place the back cover and press down the edges until it clicks into place.

    Note: Always take care while handling internal components of your smartphone. If the process is too complex, consider seeking professional help.

    Less
    More
    Showing 1 - 8 of 8 items