Elephone E10 spare parts

Elephone E10 Repuestos Technical Characteristics

The Elephone E10 Repuestos is a mobile handset with excellent components that are designed to optimize your smartphone experience.

• Display: 6.5 inches, 720 x 1600 pixels, and a 20:9 aspect ratio.
• Processor: MediaTek Helio P22, Octa-core, Quad-core 2 GHz Cortex-A53, Quad-core 1.8 GHz Cortex-A53.
• Battery: 4000mAh, Li-Po.
• RAM: 4GB.
• Storage: 64GB expandable via microSD card.
• Camera: Quad 48 MP + 13 MP + 2 MP + 5 MP rear and 13 MP front.
• Supported network: 4G.

Instructions for Replacing Elephone E10 Repuestos

Preparation

Before you begin, you need to ensure that you have the necessary tools, such as a screwdriver set, spudger, and prying tools, along with your replacement parts.

Step 1: Power off your device

Firstly, remember to power off your Elephone E10 to prevent short circuits.

Step 2: Remove the back cover

Use a prying tool to gently separate the back panel from the device. Begin from one corner and slide the tool along the edges. Keep the process gentle to avoid damage.

Step 3: Detach the Battery Connector

Find the battery connector on the logic board and carefully detach it.

Step 4: Replace the damaged part

Depending on the part you are replacing, make sure you disconnect it from any ribbon cables or connectors. Replace the damaged part with a new one and reconnect all cables.

Step 5: Reassembly

Once everything is connected, reassemble the device by following these steps in reverse order. Ensure all the screws are tightened, and the back cover is correctly snapped into place.

Step 6: Power on

Finally, power on your device to check if the replaced component is working correctly.

Please note that replacing components of your Elephone E10 should only be conducted by trained professionals, as improper handling may cause further damage to your device.