Elephone S8 spare parts

Elephone S8 Repuestos - Technical Characteristics

The Elephone S8 is a complex smartphone with various components. Here are the key technical characteristics of its main replaceable parts (repuestos):

• Battery: The Elephone S8 uses a Li-Po non-removable battery with a capacity of 4000mAh. It sustains the phone with adequate power for all its functions.
• Display Screen: The phone sports a 6.0 inches IPS LCD display with a resolution of 1440 x 2560 pixels. This high-definition screen can present images and videos with sharp and vibrant colors.
• Camera: The Elephone S8 has a 21MP rear camera and an 8MP front camera. These high-quality cameras capture images with precision and detail.
• Motherboard: This is the main circuit board, which houses the CPU, RAM, ROM, and other key components that run the software and hardware of the device.

Instructions for Replacing Elephone S8 Repuestos

Before you get started, ensure that you have the proper tools for phone repair, like precision screwdrivers, a plastic prying tool, and replacement parts. Also, make sure the phone is fully powered off.

Battery Replacement

• Unscrew and carefully remove the phone's back cover.
• Locate the battery connector on the motherboard, detach it carefully.
• Using the plastic prying tool, gently lift the battery out.
• Insert the new battery and reconnect it to the motherboard. Replace the back cover.

Display Screen Replacement

• Remove the back cover and disconnect the battery.
• Disconnect the display cable connector from the motherboard.
• Use your prying tool to gently remove the old screen from the front housing, take care to not damage any surrounding parts.
• Fit the new screen into the housing, reconnect the display cable, and reassemble the phone.

Camera Replacement

• With the back cover off and the battery disconnected, locate the camera's connector on the motherboard and disconnect it.
• Carefully remove the old camera and replace it with the new one. Reconnect the camera, battery, and replace the back cover.

Motherboard Replacement

• Disconnect the battery and all other connectors attached to the motherboard.
• Unscrew any screws holding the motherboard in place and gently lift it out.
• Place the new motherboard into position. Re-attach any screws, reconnect the battery and other connectors, and replace the back cover.