Elephone U Pro spare parts

    There are 7 products.

    Technical Characteristics of Elephone U Pro Repuestos

    The Elephone U Pro is a sophisticated device with several key components. Here are some of the standout characteristics of the Elephone U Pro repuestos:

    • Screen: High-quality OLED capacitive touchscreen with 16 million colors.
    • Resolution: Exhibits a resolution of 1080 x 2160 pixels.
    • Bat...

    Technical Characteristics of Elephone U Pro Repuestos

    The Elephone U Pro is a sophisticated device with several key components. Here are some of the standout characteristics of the Elephone U Pro repuestos:

    • Screen: High-quality OLED capacitive touchscreen with 16 million colors.
    • Resolution: Exhibits a resolution of 1080 x 2160 pixels.
    • Battery: Powered by a non-removable Li-Po 3550 mAh battery.
    • Camera: Equipped with a Dual 13 MP rear camera and an 8 MP front-facing camera.
    • Ram and Storage: Comes with 6 GB of RAM and an internal storage of 128 GB.

    Instructions for Replacing Elephone U Pro Repuestos

    Disassembly

    Before you begin, ensure the phone is powered off and remove the SIM card tray.

    • Step 1: Use a precision screwdriver to remove the two screws at the bottom of the phone.
    • Step 2: With a suction cup and plastic tool, gently pry around the edges of the back cover to release it. Be careful not to damage the rubber waterproof seal.
    • Step 3: Remove the metal shield that covers the motherboard and disconnect the battery connector.

    Component Replacement

    Depending on the component you need to replace, follow the relevant instructions:

    • Screen Replacement: Detach the screen connector from the motherboard then gently lift the old screen from one side. Replace the screen and reconnect it to the motherboard.
    • Battery Replacement: Gently pry from one side of the battery and lift it from the casing. Insert the new battery and press it into place.
    • Camera Replacement: Unscrew and remove the camera ribbon from the motherboard. Then, insert the new camera and re-screw it securely into place.

    Reassembly

    Assemble the smartphone according to the opposite order of disassembly.

    • Step 1: Reconnect the battery and replace the metal shield over the motherboard.
    • Step 2: Carefully press the back cover back into place, making sure the waterproof seal is secure.
    • Step 3: Replace the two screws at the bottom of the phone.

    Please ensure that all replacements are done using original Elephone U Pro repuestos. Always seek professional help if you are uncertain about any of the steps above.

    Less
    More
    Showing 1 - 7 of 7 items