Elephone U2 spare parts

Technical Characteristics of Elephone U2 Repuestos

The Elephone U2 repuestos refer to the various replaceable components of the Elephone U2 smartphone. The primary technical characteristics of these components include:

• Screen: Original Elephone U2 6.26 inch Full Display Touch Screen Digitizer Assembly.
• Resolution: 1080x2280 pixels.
• Battery: Non-removable Li-Po 3250 mAh battery.
• Rear Camera: Triple 16 MP, f/1.6, (wide), 1/3.06", 1.0µm, PDAF 5 MP, f/2.2 (depth).
• Front Camera: Motorized pop-up Dual 16 MP, f/2.0, 26mm (wide), 1/3.06", 1.0µm 2 MP, f/2.2, depth sensor.
• Loudspeaker: Yes.
• Ram: 6GB RAM.

Instructions for Replacing Elephone U2 Repuestos

Below are the step-by-step instructions on how to replace the primary components of the Elephone U2.

Screen Replacement

• Power off the phone and remove the sim tray with the ejector pin.
• Heat the edges of the screen with a heat gun to soften the adhesive.
• Carefully separate the screen from the phone body using a plastic opening tool.
• Unfasten the screen connector by removing the metal plate and unscrewing the screws underneath.
• Replace the broken screen with the new one, reassemble the screen and phone body by reversing the process.

Battery Replacement

• Switch off your phone before starting the battery replacement process.
• Remove the screws around the phone's frame and carefully lift the back cover.
• Disconnect the battery connector from the motherboard.
• Remove the old battery and replace it with the new one, make sure to properly connect the battery connector to the motherboard.
• Reassemble the back cover and tighten all the screws properly.

Please remember to be careful during the whole replacement process to avoid causing further damages.