Google Pixel 3 spare parts

Technical Characteristics of Google Pixel 3 Repuestos

The Google Pixel 3 repuestos are the replacement parts used for repairing the Google Pixel 3 smartphone. They are designed to the exact specifications of the original parts to ensure a flawless fit and performance.

Key Features

• Display: 5.5" Full HD+ OLED, Corning Gorilla Glass 5.
• Processor: Qualcomm Snapdragon 845.
• RAM: 4GB.
• Storage: 64GB/128GB non-expandable.
• Battery: 2,915mAh, non-removable.
• Camera: Rear 12.2 MP dual-pixel, Front 8 MP.

Instructions for Replacing Google Pixel 3 Repuestos

Before beginning, note that replacing smartphone parts requires a specific set of tools and should only be attempted with the proper knowledge. Also, make sure to back up any important data before commencing the replacement process.

Required Tools

• Small Phillips-head screwdriver
• Plastic opening tools
• Precision Tweezers

Steps to Replace Parts

NOTE: The steps described below are generic and may vary based on the specific part being replaced.

• Step 1: Turn off the Phone

  Before you start, ensure that your phone is completely powered off.

• Step 2: Remove the SIM Card Tray

  Use the ejector tool that came with your Pixel to remove the SIM card tray.

• Step 3: Open the Phone

  Use a plastic opening tool to pry the back cover from the phone. Start at the bottom and carefully slide the tool around the phone to loosen the adhesive.

• Step 4: Remove the Screws

  Unscrew the mid-frame using a small Phillips-head screwdriver. Ensure to keep the screws in a safe place.

• Step 5: Replace the Part

  Disconnect the faulty part from the motherboard, then place the new replacement part.

• Step 6: Reassemble the Phone

  Trace your steps backward to reassemble the phone. Finally, turn the phone on to check that the replacement part is working correctly.