Google Pixel 3A XL spare parts

Google Pixel 3A XL Repuestos Technical Specifications

The Google Pixel 3A XL Repuestos comes with key specifications and features that have enhanced the overall performance and design of the device.

• Screen: OLED screen, 6.0 inches, 1080 x 2160 pixels, 18:9 ratio (~402 ppi density).
• Battery: Non-removable Li-Po 3700 mAh battery, fast charging (18W).
• Rear camera: 12.2 MP, f/1.8, 28mm (wide), 1/2.55", 1.4µm, OIS, dual pixel PDAF.
• Front camera: 8 MP, f/2.0, 24mm (wide), 1.12µm.
• Processor: Qualcomm SDM670 Snapdragon 670 (10 nm), Octa-core (2x2.0 GHz 360 Gold & 6x1.7 GHz Kryo 360 Silver).
• Memory: 64GB 4GB RAM.
• Operating System: Android 9.0 (Pie), upgradable to Android 11.

Google Pixel 3A XL Repuestos Replacement Guide

Tools needed

• Screwdrivers
• Plastic opening tools
• Spudger

Steps to follow

Follow the steps outlined below closely to ensure a successful replacement of the hardware.

1. Turn off the phone

   Before you start the replacement process, make sure your phone is turned off to avoid any electrical short-circuit.

2. Removing the SIM card tray

   Use the SIM card ejector tool to remove the SIM card tray.

3. Removing the back cover

   Use a heat gun or a hair dryer to loosen the adhesive holding the back cover. Using a plastic opening tool, carefully pry open the back cover.

4. Disconnecting the battery

   Using a spudger, disconnect the battery connector.

5. Removing the screen

   Remove all the screws holding the screen in place. Once all screws are out, gently lift the screen and disconnect the connector.

6. Replacement

   Now replace the damaged component with the new part and reconnect it to the phone. Ensure all connectors are firmly in place.

7. Reassembling the phone

   Reassemble the phone by following the disassembly steps in reverse. Switch on your phone to check if the new part is working as expected.

Note: It is important to handle all parts with care to avoid damage. Additionally, ensure you use the correct tool for each part to ensure a safe replacement process.