Google Pixel 3A spare parts

Google Pixel 3A Repuestos Technical Specifications

The Google Pixel 3A, an impressive model from the Google Pixel series, features an interesting set of technical details that make it a standout smartphone. These specifications significantly influence the selection of replacement parts or 'repuestos'.

Key Hardware Specifications

• Processor: Qualcomm® Snapdragon™ 670, 2.0 GHz + 1.7 GHz, 64-bit Octa-Core
• Memory and Storage: 4 GB RAM + 64GB storage
• Display: 5.6-inch touchscreen, OLED, 2220x1080 resolutions, ~441 PPI
• Camera: Back: 12.2 MP, Front: 8 MP
• Battery: 3000 mAh

Replacement Instructions for Google Pixel 3A Repuestos

Before proceeding, it is vital to ensure that the replacement parts, Google Pixel 3A repuestos, are exact matches for the original parts. Unfit parts can lead to malfunctions in the smartphone. Please take note that the following guide does not cover every part; it focuses mainly on the display and battery, both of which are typically replaced.

Screen Replacement

• Turn off the smartphone and remove the SIM card tray.
• Gradually heat the edges of the screen, using a specialized heating pad or hair dryer, which helps soften the adhesive.
• Use a thin but strong tool such as a pry tool to slowly separate the screen from the frame.
• Go around the edges, making sure not to delve in too deep to prevent damaging interior parts.
• Once opened, disconnect the flex cable connecting the screen, then remove the old screen.
• Place the new screen and test its functionality before sealing it back into place.

Battery Replacement

• After opening the smartphone following the steps above, locate the battery connector and disconnect it.
• Remove the screws securing the battery, if any, and carefully detach the adhesive holding it down.
• Replace it with a new battery, secure it with its screws and reconnect the battery connector.
• Before assembling the phone, power it on to test the new battery functionality.

Always remember, if you are unconfident with self-repairs, you should let a professional handle it. Incorrect workmanship may lead to a voided warranty or further damages.