Google Pixel 4A spare parts

Technical Characteristics of Google Pixel 4A Repuestos

The following describes the main technical characteristics *

• Super AMOLED capacitive touchscreen, 16M colors
• Resolution: 1080 x 2340 pixels, 19.5:9 ratio (~443 ppi density)
• Battery: Non-removable Li-Po 3140 mAh battery
• Operating System: Android 10, upgradable to Android 12
• Chipset: Qualcomm SDM730 Snapdragon 730G (8 nm)
• Memory: 128GB 6GB RAM

How to Replace Google Pixel 4A Repuestos

Tools Required:

You will require the following tools:

• Screwdriver set
• Plastic spudger
• Plastic opening tool
• Heat gun or hairdryer

Steps:

Follow the steps below for successful replacement:

1. Power off your Google Pixel 4A phone to avoid causing any possible damage during the replacement process.
2. Apply heat to the sides of the phone. The heat will help to weaken the adhesive that holds the screen in its place.
3. Use the plastic opening tool to pry open the screen. Please be very careful during this step so as not to damage the screen.
4. Once you have completely separated the screen from the phone, disconnect any cables that are attaching the screen to the phone.
5. Next, remove any screws that are holding the battery or any other component you are replacing in place. You'll need a screwdriver for this step.
6. Replace the damaged component with the new one. Make sure you securely fit it in place and screw in the screws that were removed.
7. Reconnect the cables, put back the screen, and power on the phone to check if the replacement was successful.

* Ensure you observe safety guidelines and precautions while carrying out hardware repairs on electronic devices.