Hisense Altice S41 repuestos

    There are 2 products.

    Hisense Altice S41 Repuestos: Technical Characteristics

    The Hisense Altice S41 is popular smartphone model from Hisense. Listed below are the crucial parts, or "repuestos", as they are known in Spanish.

    • Screen and Display

      The Hisense Altice S41 has a 5.0 inch LCD display with a resolution of 1280 x 720 pixels.

    • Battery

      Hisense Altice S41 is powere...

    Hisense Altice S41 Repuestos: Technical Characteristics

    The Hisense Altice S41 is popular smartphone model from Hisense. Listed below are the crucial parts, or "repuestos", as they are known in Spanish.

    • Screen and Display

      The Hisense Altice S41 has a 5.0 inch LCD display with a resolution of 1280 x 720 pixels.

    • Battery

      Hisense Altice S41 is powered by a 2400mAh non-removable Li-Ion battery.

    • Camera

      The smartphone comprises of a 13MP rear camera and 5.0MP front camera.

    Replacement Instructions

    Below are general instructions for replacing the parts or 'repuestos'. Please be experiences that these are delicate tasks and the likelihood of causing further damage is high if one is not experienced in smartphone repairs.

    Screen and Display Replacement

    • Turn off the device.

    • Use a heat gun or a professional separator to soften the adhesive holding the screen.

    • Carefully use a pry tool to lift the screen.

    • Disconnect the cables connected to the display, replace the faulty screen with a new one, and reattach the cables.

    • Secure the new screen and ensure it is strongly adhered to the frame.

    Battery Replacement

    • After opening the device as indicated in the screen replacement instruction, identify and disconnect the battery cable.

    • Remove the old battery using a plastic opening tool.

    • Place your new battery and reconnect it.

    Camera Replacement

    • Open the device.

    • Carefully disconnect the camera ribbons from the motherboard.

    • After disconnecting, remove the old camera and replace it with a new one.

    • Connect the camera to the motherboard, and then reassemble the device.

    Note: Always handle the parts with care, especially the ribbons as they can tear easily.

    Less
    More
    Showing 1 - 2 of 2 items