Hisense Altice S51 repuestos

Technical Characteristics of Hisense Altice S51 Repuestos

The Hisense Altice S51 repuestos consists of various parts that can be replaced to keep your smartphone in optimal condition. Remember to ensure compatibility with your Hisense Altice S51 before starting any replacement.

• Display: The replacement LTPS IPS LCD screen offers vibrant and precise colors, with a resolution of 720 by 1280 pixels. It has a 2.5D curved glass screen that enhances durability and provides a smooth touch experience.
• Battery: The replacement battery for the Hisense Altice S51 has a 3000mAh capacity, providing long-lasting power for your smartphone use.
• Camera: The camera repuestos include both the front and rear sensors. The rear camera replacement boasts 13 MP, and the front 'selfie' camera replacement features 5 MP.
• Motherboard: This component is the backbone of the phone, possessing the chipsets that govern the operation of the Hisense Altice S51.

Instructions on how to replace Hisense Altice S51 Repuestos

Replacing the Screen

Make sure your phone is turned off before starting the screen replacement process.

• Begin by removing the SIM card and memory card if present in the phone.
• Using a heat gun, slightly warm up the sides of the screen so as to loosen the adhesive.
• Gently pry open the screen using a pry tool, working your way around the phone.
• Once the screen is removed, disconnect the connected flex cables.
• Connect the new replacement screen and carefully place it back onto the phone body.
• Press gently around the edges to secure the adhesive and turn on your phone to test the new display.

Replacing the Battery

Ensure your phone is powered off before replacing the battery.

• Remove the back cover using a heat gun to soften the adhesive and then a pry tool to separate the cover.
• Find the battery connector on the motherboard and unclip it.
• Use a pry tool to carefully lift the battery from its compartment. This should be done gently to avoid damaging other parts of the phone.
• Place the new battery into the compartment and clip the connector back into the motherboard.
• Reattach the back cover, pressing firmly to secure the adhesive. Power on your phone to ensure the new battery is functioning correctly.

Camera Replacement

Turn off your phone before starting the camera replacement.

• Start by removing the back cover using a heat gun to loosen the adhesive and a pry tool for separation.
• Locate the camera's connector on the motherboard and unclip it.
• Remove the screws around the camera, then remove the camera from its slot.
• Insert the new camera in its place, screw it back on, and reclip the connector on the motherboard.
• Once the new camera is secured, reattach the back cover and turn on your phone to ensure the new camera is functioning correctly.