Hisense Infinity C1 repuestos

Hisense Infinity C1: Technical Characteristics

The Hisense Infinity C1, also known as the Hisense C1, is a compact smartphone that offers a sleek design and useful functions. Below are some of its technical characteristics:

• Operating System: Android
• Screen Size: 5.0 inches
• Resolution: 720 x 1280 pixels
• Processor Type: Quad-core 1.2 GHz Cortex-A53
• Ram: 1GB
• Storage Capacity: 16GB expandable up to 64GB microSD
• Battery: Non-Removable Li-Ion 2300 mAh battery

Instructions for replacing Hisense Infinity C1 repuestos (spare parts)

In order to replace the spare parts, one needs to carefully follow these step-by-step instructions:

Disclaimer:

This procedure should ideally be performed by a trained technician. Any damage that may occur during the process will not be covered by the warranty.

Tools needed:

• Screwdrivers
• Suction cup
• Spudger
• Plectrum
• New Hisense Infinity C1 spare part

Steps to follow:

• Power off the phone and remove the SIM Card Tray.
• Gently heat the back cover to soften the adhesive. Then use the suction cup to create a gap between the cover and the phone body.
• With the gap created, insert the plectrum and slide it around the edges to separate the two elements.
• Remove the screws securing the middle frame and lift it off from the assembly.
• Disconnect the battery connector using the spudger.
• For screen replacements, remove the screws holding the LCD bracket in place. Lift the bracket and disconnect the screen connector to remove the broken screen.
• For battery replacements, lift the battery gently from the assembly after disconnecting the connector.
• Replace the faulty part with the new Hisense Infinity C1 spare part.
• Reassemble the phone in the reverse order.

Note:

Make sure that all connectors are properly seated while reassembling and remember to test the functionality of the replaced part before finally sealing the phone's body.