Homtom HT17 spare parts

Technical Characteristics of Homtom HT17 Repuestos

The Homtom HT17 Repuestos are smartphone parts designed specifically for the Homtom HT17 model. Below we detail their key characteristics:

• Screen: The digital panel is a 5.5-inch HD IPS LCD with a resolution of 1280x720 pixels. It offers touch screen functionality.
• Battery: This phone uses a Lithium-Ion battery with a capacity of 3000mAh.
• Camera: The replacement part camera provides rear-facing 13 MP photography and 5 MP front-facing camera.
• Motherboard: The motherboard holds a quad-core processor, speed at 1.3 GHz, and a Mali T720 graphics chip.

Instructions to Replace Homtom HT17 Repuestos

Follow these steps closely to replace the Homtom HT17 Repuestos:

Screen Replacement

• Turn off your Homtom HT17 handset to prevent any short circuit issue.
• Use a heat gun to loosen the adhesive holding the screen to the phone body.
• Slightly lift the screen using a pry tool but be careful not to disconnect the flex cables.
• Detach the connector of the screen and remove the broken screen.
• Attach the new screen by reconnecting the connector and apply adhesive on the edges.
• Reassemble the phone taking care not to damage any parts.

Battery Replacement

• Switch off your Homtom HT17 smartphone.
• Open the back cover and remove the screws to access the battery.
• Disconnect the battery connector carefully.
• Replace with the new battery and reconnect the connector.
• Put the back cover back and secure the screws.

Camera Replacement

• Ensure your Homtom HT17 is turned off.
• Remove the back cover and unscrew the screws to expose the motherboard.
• Carefully disconnect the camera connector attached to the motherboard.
• Replace the camera with a new one and reconnect on the motherboard.
• Reassemble the back cover and secure the screws.

Motherboard Replacement

• Start by turning off your Homtom HT17 handset.
• Remove all the screws holding the back cover and lift it off to access the motherboard.
• Detach all connectors attached to the motherboard including screen, camera, battery etc.
• Now, you can replace the motherboard and reattach all the connectors as before.
• Reattach the back and secure with all the screws.

Note: All the steps should be performed carefully to avoid damaging any of the sensitive components of the smartphone.