Homtom HT3 spare parts

Technical Characteristics of Homtom HT3 Repuestos

The Homtom HT3 Repuestos are replacement parts for Homtom HT3 smartphones. These parts each have unique specifications that ensure seamless functionality.

Parts and Specifications

• Screen: The touch screen is a 5.0 inch HD display with 720x1280 pixels resolution.
• Battery: The replacement battery is a Li-Ion 3000mAh non-removable type.
• Charging Port: Micro USB 2.0, coupled with USB On-The-Go.
• Camera: The primary/back camera hardware is an 8MP sensor with autofocus feature, and the secondary/front camera is 2MP.
• System Board: This is equipped with a MediaTek MT6580 Chipset, Quad-core 1.3 GHz Cortex-A7 CPU, and Mali-400MP2 GPU.

Instructions to Replace Homtom HT3 Repuestos

Replacement of parts should be done with critical care to avoid further device damage. Below are the guidelines for replacing the Homtom HT3 Repuestos.

Screen Replacement

• Power off the phone and remove the back cover and battery.
• With a pry tool, gently disconnect the screen connector from the motherboard.
• Remove the damaged screen and replace it with the new screen, connecting it to the motherboard.
• Restart the phone to test functionality.

Battery Replacement

• After powering off the phone, remove the back cover.
• Carefully lift out the old battery.
• Place the new battery into the compartment and replace the cover.
• Turn on the phone to test the new battery.

Camera, Charging Port, and System Board Replacement

• Switch off the smartphone and remove the back cover and battery.
• Using the appropriate screwdriver, remove the screws attaching the component to the device.
• Disconnect the damaged component.
• Connect the new component and secure it with the screws removed earlier. Replace the battery and cover, then power on the phone to check the functionality.