Touch screen HP

Pantalla táctil HP Technical Specifications

The HP Touchscreen, also known as Pantalla táctil HP in Spanish, is a sensitive piece of equipment that requires care in handling but offers quality interaction when used.

• Resolution: 1920 x 1080 pixels for max models
• Touchscreen Type: CAPACITIVE
• Screen Size: Varies with model
• Screen Tech: LED | Brightview | Micro-Edge

Steps to Replace the Pantalla táctil HP

For safety and the prevention of damage, please ensure to power off and unplug your HP device before performing any form of repair or replacement.

Step 1: Tool Gathering

Prepare the following tools:

• Screwdriver kit
• Plastic or metallic opening tool

Step 2: Remove the Back Cover

Carefully use the screwdriver kit to remove the screws on the back cover. Then gently use the opening tool to pry open the back cover.

Step 3: Unplug the Battery

Locate the battery and disconnect it to prevent any electric shock hazard.

Step 4: Remove the Existing Display

Now, locate the screen connector and unplug it carefully. With that done, remove the screws holding the screen and gently lift it off.

Step 5: Install the New Pantalla táctil HP

Now proceed to place the new Pantalla táctil HP into position, screw it in, and reconnect the screen connector.

Step 6: Reassemble the Device

With that done, reconnect the battery, reattach the back cover, and screw it back in place with the screwdriver kit.

Final Procedure

Once the above steps have been properly carried out, you should be able to boot your device and make use of your new Pantalla táctil HP without any issues. Remember to handle your device with care to prevent damage to the display or other components.