HTC 7 Mozart repuestos

    There are 3 products.

    Technical Characteristics of HTC 7 Mozart Repuestos

    The HTC 7 Mozart is a sleek smartphone created by HTC Corporation. The relevance of its repuestos (parts or spares) arises from the need to maintain the efficiency and functionality of the phone.

    Important HTC 7 Mozart Repuestos:

    • Screen: 3.7-inch touchscreen, 480 x 800 resolution
    • Processor: Q...

    Technical Characteristics of HTC 7 Mozart Repuestos

    The HTC 7 Mozart is a sleek smartphone created by HTC Corporation. The relevance of its repuestos (parts or spares) arises from the need to maintain the efficiency and functionality of the phone.

    Important HTC 7 Mozart Repuestos:

    • Screen: 3.7-inch touchscreen, 480 x 800 resolution
    • Processor: Qualcomm Snapdragon QSD8250, 1 GHz
    • Ram: 576 MB RAM
    • Battery: Rechargeable 1300mAh Li-ion battery
    • Camera: 8 MP Camera with Xenon flash and auto focus

    Replacing HTC 7 Mozart Repuestos

    Screen Replacement

    Before you start, make sure to power off your HTC 7 Mozart to avoid causing any further damage.

    • Remove the battery cover and battery.
    • Then, loosen the screws that hold the screen to the frame.
    • Carefully remove the damaged screen.
    • Align the new screen on the frame.
    • Tighten the screws to secure the new screen.
    • Reinsert the battery and its cover.

    Battery Replacement

    When replacing the battery, make sure to use compatible and certified HTC batteries to avoid harming the device.

    • Start by turning off the HTC 7 Mozart.
    • Open the battery cover on the back of your phone.
    • Remove the old battery.
    • Insert the new battery in the same spot, with its contacts aligned with the phone's contacts.
    • Replace the battery cover.

    Camera Replacement

    If you suspect the camera is faulty, you may need to replace it. Do not attempt to disassemble other parts of the phone unnecessarily.

    • Switch off the phone and remove the battery cover and battery.
    • Remove the screws holding the back panel and camera in place.
    • Carefully remove the faulty camera and replace it with the new one, ensuring it is properly connected.
    • After securing the camera in place, reassemble the back panel by putting back the screws and reinsert the battery and cover.
    Less
    More
    Showing 1 - 3 of 3 items